Roland V-Drums TD-30 Owner's Manual page 147

Making VISUAL CONTROL Settings
1.
In the SETUP C screen (p . 114), press the
[F2] (V . CTRL) button .
The VISUAL CONTROL screen will appear.
2.
Use the [–] [+] buttons or the dial to set the
parameters .
Parameter Value
MVC
Control Mode
V-LINK
MIDI Ch CH1–CH16
3.
Press the [EXIT] button to return to the SETUP C
screen .
Explanation
Choose this if a video
device supporting MIDI
Visual Control is
connected.
Choose this if a video
device supporting V-LINK
is connected.
The MIDI channel used to
switch images.
Using the Pad Pattern function to
control images
When playing pads to trigger patterns on the TD-30 (Pad
pattern function, p. 60), note number messages in the
pattern can be assigned to control images on an external
device that supports Visual Control.
Preset patterns 99 and 100 already have the following
note numbers assigned so they are already prepared for
using Visual Control to control images.
Pattern Note number
36
38
40
99
41
7 Notes
43
45
47
MEMO
• "Backing parts" refer to the parts of a pattern other
than the drum part and the percussion part (p. 92).
• Set the pattern's Play Type to "MVC" (p. 98).
• The performance data from the sequencer's backing
parts is transmitted on the MIDI Ch.
Visual Control
Pattern Note number
36
37
38
39
40
41
100
12 Notes
42
43
44
45
46
47
147