Editing The Ambience (Edit) - Roland V-Drums TD-30 Owner's Manual

Effects

Editing the Ambience (EDIT)

Here's how to edit the ambience settings.
1.
In the AMBIENCE SECTION screen, press the [F5]
(EDIT) button .
2.
Use the [F2]–[F5] buttons and cursor buttons to
select the desired parameter .
Button
[F2] (OVRHEAD) button
[F3] (ROOM) button
[F4] (REVERB) button
[F5] (SEND) button
3.
Use the [–] [+] buttons or dial to edit the values .
Parameter Value
[F1] button
OFF –
ON –
[F2] (OVRHEAD) button
LOW, MID,
STANDARD,
Mic Height
HIGH, EXT HIGH,
HIGH FLAT,
MONO, 0.5m,
Mic Width
1.0m, 1.5m, 2.0m
Level
0–127
[F3] (ROOM) button
BEACH, LIVING
ROOM, BATH
ROOM, STUDIO,
GARAGE, LOCKER
ROOM, THEATER,
CAVE, GYMNA-
SIUM, DOME
STADIUM, BOOTH
A, BOOTH B,
Type
STUDIO A, STUDIO
B, BASEMENT,
JAZZ CLUB, ROCK
CLUB, BALLROOM,
GATE, CONCERT
HALL, SPORTS
ARENA, EXPO
HALL, BOTTLE,
CITY, SPIRAL
70
Explanation
Adjusts the position of the
overhead mics.
Edits the ambience of the room in
which you're performing.
Edits the reverb settings.
Adjusts the send level of each
effect for each pad (common to
head and rim).
Explanation
Turn each effect on/off.
Height of the overhead
mics
Spacing of the overhead
mics
Volume of the overhead
mics
Type of room reverbera-
tion
Parameter Value
TINY, SMALL,
Room Size
MEDIUM, LARGE,
HUGE
Room Shape 0–100
CURTAIN, CLOTH,
Wall Type WOOD, PLASTER,
CONCRETE, GLASS
NEXT DOOR,
LOW FLOOR,
LOW, MID LOW,
Mic Position
MID, MID HIGH,
HIGH, CEILING A,
CEILING B
Level
0–127
[F4] (REVERB) button
Reverb Time 0.1–3.0 s
Hi Damp Freq 1000–10000 Hz
Hi Damp 1–100 %
Mid Freq 100–10000 Hz
Mid Gain -15–+15 dB
Lo Cut Freq 10–1000 Hz
Level 0–127
[F5] (SEND) button
SEND LEVEL
0–127
4.
Press the [KIT] button to return to the DRUM KIT
screen .
Explanation
Size of the room
Room shape and
reverberation length
Wall material
Position of the ambience
mics
Overall amount of
ambience
Reverb time
Adjusts the frequency
above which the high
frequency content of
the reverb sound will be
reduced, or "damped. "
Adjusts the amount of
damping applied to the
frequency range selected
with Hi Damp Freq.
With a setting of "100 %, "
there will be no reduction
of the reverb's high-
frequency content.
Center frequency of the
middle range
Amount of mid-range
boost/cut
The region below this
frequency will be cut.
Reverb volume
Amount of ambience
applied to each pad
MEMO
• The head and rim will
have the same setting.
• In the SEND LEVEL
screen, you can hold
down the [SHIFT]
button and press the
[MIXER] button, and
then use the faders to
make adjustments.