Choosing A Pad To Edit; Lock The Pad You Are Editing (Trigger Lock) - Roland V-Drums TD-30 Owner's Manual

The indication below the
instrument name
If you turn the [F5] (H&R) button off, the following
information will be shown below the instrument
name. You'll be able to obtain the effects that are
shown.
Display Explanation
The tone will change according
to the striking position. For a
rim sound, the tone will change
depending on the depth at which
the stick strikes the rim.
POSI
Use the Position Ctrl setting to turn
this effect on/off. You can specify
this only for specific trigger inputs
(p. 61).
Smoothes the interval between
notes according to the perfor-
INTRVL
mance technique used, such as a
roll or flam.
If the cross-stick switch is on (p. 49),
XSTK you'll be able to play rim shots and
cross-stick separately.

Choosing a Pad to Edit

There are two basic ways to select the pad you want to
edit.
Choose by hitting a pad
1.
Press the [INST] button .
The [INST] button will light, and the INST screen will
appear.
2.
Strike a pad .
The settings screen for the struck pad appears.
To select a pad's rim, strike the rim.
Choose with the TRIG SELECT buttons
1.
Press the [INST] button .
The [INST] button will light, and the INST screen will
appear.
2.
Press the [1] or [15] button to select the pad (the
trigger input number) .
The trigger input number is indicated in the upper part
of the screen.
3.
Press the [RIM] button to select the head or rim .
[RIM] button
Unlit
Lit
MEMO
When MIDI note number corresponding to a pad is
received, the pad is selected and shown in the screen.
Lock the Pad You Are Editing
(Trigger Lock)
If you want to hear your editing in the context of your
performance, you can prevent the edited pad from being
switched when you play.
1.
Select the pad to be locked .
The settings screen for the pad appears.
2.
Press the [LOCK] button to make it light .
The pad is locked and other pads cannot be selected.
3.
To release the lock, press the [LOCK] button to
make it go off .
MEMO
You can change the pad to be edited by pressing
the TRIG SELECT [1] or [15] button even if the [LOCK]
button is lit.
Instrument
Explanation
Head is selected.
Rim is selected.
55