Settings For The Vh-11 - Roland V-Drums TD-30 Owner's Manual

Adjusting the offset of VH-13/VH-12
automatically
If you're using the VH-13/VH-12 V-hi-hat, execute the
offset automatically adjustment from the TD-30 after
making connections.
This adjustment is required in order to correctly detect
open, close, and pedal operations.
1.
Set the hi-hat's Trigger Type to "VH13" (or
"VH12") (p . 126) .
2.
In the TRIGGER HI-HAT screen, [F4] (OFFSET)
button .
The VH OFFSET ADJUSTMENT screen will appear.
3.
Loosen the clutch screw of the top hi-hat and let
it sit on the bottom hi-hat .
* Do NOT touch the hi-hats or the pedal.
4.
Press the [F5] (EXECUTE) button .
The [TRIGGER] button flashes, and the offset parameter is
set automatically.
When finished, the [TRIGGER] button stops flashing and
remains lit, and the TRIGGER HI-HAT screen appears.
MEMO
You can also perform this operation by holding down
the [KIT] button and pressing the [TRIGGER] button.

Settings for the VH-11

Set Trigger Type to "VH11" (p. 126).
Parameter Value
Foot Splash
-10–+10
Sens
90, 127
CC Max
(initial value: 90)
Adjusting the offset of VH-11
If you're using the VH-11 V-hi-hat, execute the offset
adjustment from the TD-30 after making connections.
This adjustment is required in order to correctly detect
open, close, and pedal operations.
1.
Connect the VH-11 and TD-30 .
2.
After making the hi-hat settings, release your
foot from the pedal, and while keeping your foot
off the pedal, turn on the TD-30 .
3.
Loosen the clutch screw and let the hi-hat rest
naturally on the motion sensor unit .
4.
Press the [TRIGGER] button .
5.
Press the [F1] (BANK) button .
The [TRIGGER] button will light, TRIGGER BANK screen
will appear.
6.
Press the [F3] (HI-HAT) button .
The TRIGGER HI-HAT screen will appear.
7.
Set the Trigger Type for hi-hat to "VH11" (p . 126) .
Trigger Settings
Explanation
Amount of how easy to
make the foot splash
Amount of control change
that is transmitted in
stepping the pedal down
completely.
* There's no need to
change this setting if
you're performed only
with the TD-30 and the
pads.
129