Backing Up A Drum Kit To A Usb Flash Drive (Kitsave); Loading Kit Data From A Usb Flash Drive (Kitload) - Roland V-Drums TD-30 Owner's Manual

Backing Up the Settings
Backing Up a Drum Kit to a USB
Flash Drive (KITSAVE)
Here's how you can save drum kit data to your USB flash
drive (up to 999 kits).
1.
Connect your USB flash drive to the TD-30's USB
MEMORY port (p . 85) .
2.
Press the [USB MEM] button .
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
3.
Press the [F5] (A
The USB MEMORY B screen will appear.
4.
Press the [F1] (KITSAVE) button .
The USB SAVE (1 KIT) screen will appear.
Drum kit to back up
Backup number
5.
Use the cursor buttons and the [–] [+] buttons or
the dial to select the drum kit that you want to
back up and the backup number .
If you press the [F4] (NEW) button, the lowest-numbered
backup that contains no data will be selected.
6.
Press the [F5] (SAVE) button .
A confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
7.
Press the [F5] (EXECUTE) button .
The data will be saved to USB memory.
112
B) button .
Loading Kit Data from a USB
Flash Drive (KITLOAD)
Here's how kit data saved on a USB flash drive can be
loaded into the TD-30.
1.
Connect your USB flash drive to the TD-30's USB
MEMORY port (p . 85) .
2.
Press the [USB MEM] button .
The [USB MEM] button will light, and the USB MEMORY A
screen will appear.
3.
Press the [F5] (A
The USB MEMORY B screen will appear.
4.
Press the [F2] (KITLOAD) button .
The USB LOAD (1 KIT) screen will appear.
Kit data to load
Loading-destination drum kit
5.
Use the cursor buttons and the [–] [+] buttons
or the dial to select the kit data that you want to
load, and the drum kit into which you want to
load it .
6.
Press the [F5] (LOAD) button .
A confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
7.
Press the [F5] (EXECUTE) button .
The kit data will be loaded from the USB flash drive.
B) button .