Loading A Pattern From A Usb Flash Drive; (Load); Deleting A Pattern From A Usb Flash Drive; (Delete) - Roland V-Drums TD-30 Owner's Manual

Pattern Sequencer
Loading a Pattern from a USB
Flash Drive (LOAD)
Patterns saved on a USB flash drive can be loaded into
the TD-30.
1.
Connect your USB flash drive to the TD-30's USB
MEMORY port (p . 85) .
2.
In the PATTERN EDIT screen (p . 101), press the [F5]
(USB MEM) button .
The PATTERN USB screen will appear.
3.
Press the [F2] (LOAD) button .
The PATTERN LOAD screen will appear.
4.
Press the cursor [ ] button, and then use the [–]
[+] buttons or the dial to select the number of
the pattern that you want to load .
5.
Press the [ ] button, and then use the [–]
[+] buttons or the dial to select the loading-
destination for the pattern .
6.
Press the [F5] (LOAD) button .
A confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
7.
Press the [F5] (EXECUTE) button .
The pattern will be loaded.
106
Deleting a Pattern from a USB
Flash Drive (DELETE)
You can delete the unneeded pattern from a USB flash
drive.
1.
Connect your USB flash drive to the TD-30's USB
MEMORY port (p . 85) .
2.
In the PATTERN EDIT screen (p . 101), press the [F5]
(USB MEM) button .
The PATTERN USB screen will appear.
3.
Press the [F3] (DELETE) button .
The PATTERN DELETE screen will appear.
4.
Use the [–] [+] buttons or the dial to select the
number of the pattern that you want to delete .
5.
Press the [F5] (DELETE) button .
A confirmation message will appear.
If you decide to cancel, press the [F1] (CANCEL) button.
6.
Press the [F5] (EXECUTE) button .
The pattern will be deleted.