Setting The Volume And Pan Of Each Part; (Mixer); Applying Reverb/Chorus To The Backing Parts; (Rev/Cho) - Roland V-Drums TD-30 Owner's Manual

Pattern Sequencer
Setting the Volume and Pan of
Each Part (MIXER)
Set the volume and pan for each part.
MEMO
• Drum part cannot be set here. Set in the MIXER
settings (p. 65).
• To adjust volume/pan settings for each instrument in
the PERCUSSION SET EDIT screen.
1.
In the PATTERN PART screen (p . 91), press the [F4]
(MIXER) button .
The PART VOLUME, PART PAN, PART REVERB SEND LEVEL,
or PART CHORUS SEND LEVEL screen will appear.
2.
Press the [F1]–[F4] buttons to select the
parameter .
3.
Use the cursor [ ] [
you wish to set .
4.
Use the dial, the [–] [+], or cursor [ ] [ ] buttons
to make settings .
Parameter Value
[F1] (VOLUME) button
PART VOLUME 0–127
[F2] (PAN) button
PART PAN L15–CTR–R15
[F3] (REV SND) button
PART REVERB
0–127
SEND
[F4] (CHO SND) button
PART CHORUS
0–127
SEND
5.
Press the [EXIT] button to return to the PATTERN
PART screen .
96
] buttons to select the part
Explanation
Volume of each part
The percussion part
(PERC) specifies the
volume of the entire part.
Panning of each part
Reverb depth of each part
Chorus depth of each part
Applying Reverb/Chorus to the
Backing Parts (REV/CHO)
Set the amount of reverb and chorus for each backing
part.
1.
In the PATTERN PART screen (p . 91), press the
[F5] (REV/CHO) button .
The REVERB/CHORUS screen will appear.
2.
Press the [F2]–[F4] buttons to select the
parameter .
3.
Use the cursor buttons to select the parameter .
4.
Use the [–] [+] buttons or the dial to make
settings .
Parameter Value
[F2] (REV/CHO) button
REVERB
AMBIENCE,
ROOM,
Type
HALL,
PLATE
Time 0–127
CHORUS
Rate 1–64
Depth
1–64
[F3] (REV SND) button
PART REVERB
0–127
SEND
[F4] (CHO SND) button
PART CHORUS
0–127
SEND
Explanation
Type of reverb
Reverb length/delay time
Speed of modulation
Depth of modulation
Amount of reverb applied
to each part
Amount of chorus applied
to each part