Overall Settings For The Td-30 (Setup) - Roland V-Drums TD-30 Owner's Manual

Overall Settings for the TD-30 (SETUP)

"Setup" refers to the settings that apply in common to
the entire TD-30, such as output destination settings and
footswitch assignments.
To make setup settings, access the SETUP screen as
follows.
1.
Press the [SETUP] button .
The [SETUP] button will light, and the SETUP A screen
will appear.
2.
Press [F5] (A B C) button to access the screen
containing the item you want to set .
SETUP A screen
Button
[F1] (OUTPUT) button
[F2] (CONTROL) button
[F3] (OPTION) button
[F4] (F RESET) button
SETUP B screen
Button
[F1] (KIT SEL) button
[F2] (GAIN) button
[F3] (MIDI) button
114
Explanation
Specify the output destination of
the sounds.
Assign functions to footswitches or
pads (p. 117).
Make settings for the preview but-
ton, master compressor/equalizer,
MIX IN jack, and the display (p. 120).
Return the TD-30 to the factory
settings (p. 122).
Explanation
Play a kit from a USB flash drive
without loading it (p. 123).
Adjust the digital output volume
(p. 124).
Allow you to make MIDI settings
(p. 141).
SETUP B screen
Button Explanation
Make settings for the auto off
[F1] (AUTO OFF) button
function (p. 124).
Make settings for the VISUAL
[F2] (V . CTRL) button
CONTROL function (p. 146).
View information about the TD-30
[F4] (INFO) button
(p. 125).