Auditioning The Ambience Effect (Amb Only); Applying Effects To The Sound (Multi Effects); Editing The Multi-Effect - Roland V-Drums TD-30 Owner's Manual

Turning ambience on/off
Here's how to turn the various ambience effects on/off.
1.
Press the [AMBIENCE] button .
The [AMBIENCE] button will light, and the AMBIENCE
SECTION screen will appear.
2.
Press the [F1]-[F3] buttons to turn each effect
on/off .
Button
[F1] button
[F2] button
[F3] button
MEMO
The settings of the ambience section can be turned
on/off together (p. 67).
Auditioning the Ambience Effect
(AMB ONLY)
In the AMBIENCE SECTION screen, pressing the [F4] (AMB
ONLY) button will cause only the sound processed by
ambience to be output from the MASTER OUT jacks and
the PHONES jack. This is a convenient way to audition the
effect while you're editing.
You can also audition the ambience effect from an
editing screen (OVERHEAD MICS, ROOM, REVERB screens)
by holding down the [SHIFT] button and pressing the
[F4] button.
This function will be cancelled automatically when you
access a different screen.
Explanation
Adjusts the position of the
overhead mics.
Edits the ambience of the room in
which you're performing.
Edits the reverb settings.
Applying Effects to the Sound
(MULTI EFFECTS)
Here you can apply various effects, such as adding depth
and spaciousness to the sound or shifting the pitch.
The TD-30 provides the following 21 types of effect.
Type Page
STEREO DELAY p. 73
REVERSE DELAY p. 73
TAPE ECHO p. 73
CHORUS p. 73
PHASER p. 73
STEP PHASER p. 74
FLANGER p. 74
REVERB p. 74
LONG REVERB p. 75
SATURATOR p. 75
SUPER FILTER p. 75

Editing the Multi-Effect

1.
Press the [MULTI EFFECTS] button .
[MULTI EFFECTS] button will light, and the MULTI
EFFECTS screen will appear.
2.
Use the [F2]-[F4] buttons and the cursor buttons
to select a parameter .
Effects
Type Page
FILTER+DRIVE p. 75
AUTO WAH p. 76
LO-FI COMPRESS p. 76
DISTORTION p. 76
OVERDRIVE p. 76
ISOLATOR p. 76
RING MODULATOR p. 77
STEP RINGMOD p. 77
PITCH SHIFT p. 77
AUTO PAN p. 77
71