Adjusting The Display Contrast (Lcd Contrast); Adjusting The Brightness Of The Backlight (Lcd Bright); Adjusting The Button Operating Sound (Keypad Sound); Allowing The Head And Rim Settings To Be Edited Separately (Head/Rim Link) - Roland TD-4 Owner's Manual

Adjusting the Display Contrast (LCD Contrast)

fig.d-Sys-Option-1.eps
Value
1–10
Adjusting the Brightness of the Backlight
(LCD Bright)
fig.d-Sys-Option-2.eps
Value
1–10
Adjusting the Button Operating Sound
(Keypad Sound)
fig.d-Sys-Option-3.eps
Value Explanation
OFF The buttons will not produce an operating sound.
1–3 Specifies the volume of the operating sound.
Allowing the Head and Rim Settings to be
Edited Separately (Head/Rim Link)
fig.d-Sys-Option-4.epsm
Value Explanation
Head and rim (or for a cymbal, the bow and
edge) settings (Instrument/Tuning/Muffling/
Pad Volume/Pan) will be edited simultaneously
for SNARE, HH, CRASH, and RIDE.
ON
* If Crash 2 Usage is set to RIDE BELL, the
RIDE's BELL will also be edited
simultaneously.
Head and rim settings will be edited separately
OFF
for SNARE, HH, CRASH, and RIDE.
Restoring the Factory Settings
(Factory Reset)
The "Factory Reset" operation returns all settings of all pads and
drum kits stored in the TD-4 to their factory-set condition.
* If you want to return an individual kit to its factory settings,
execute the drum kit "Restore" operation (p. 33).
The settings stored in the TD-4 will be lost when you execute
a factory reset.
1. In the "Options" screen, press the SEL [
a number of times to choose "Factory Reset," and
press the [OK] button.
fig.d-Sys-FRst-1.eps
2. Use the [-/+] dial to select the settings for which
you want to execute a factory reset.
Value Explanation
PADS PAD SETTINGS parameter
System Parameter
SYSTEM
(OPTIONS and PAD SETTINGS parameter)
ALL KITS All Drum kit
ALL All of the TD-4's data
3. Press the SEL [ ] button.
A confirmation message appears.
fig.d-Sys-FRst-2.eps
* If you decide to cancel, press the [MENU] button.
4. Press the [OK] button.
The factory reset will be executed.
When the factory reset is finished, the following message will
appear and you will return to the DRUM KIT screen.
fig.d-Sys-FRst-3.eps
System Settings
] button
37