Advanced Trigger Parameters (Advance) - Roland V-Drums TD-30 Owner's Manual

Trigger Settings
4.
Press the [F5] (SET) button .
The value is automatically set to "32, " which is the
minimum value that can cancel triggering for crash 1.
Value
0–80
* The value will not exceed 40 when you set crosstalk
cancellation automatically. If you need to set this
value above 40, use the [–] [+] buttons or the dial to
edit the value.
5.
Repeat steps 3 and 4 to make crosstalk
cancellation settings .
MEMO
You can also use the cursor [
buttons, or the dial to make crosstalk cancellation
settings manually.
6.
Press the [EXIT] button to return to the TRIGGER
BANK screen .
132
Explanation
Strength of crosstalk cancellation
] [ ] buttons, [–] [+]
Advanced Trigger Parameters
(ADVANCE)
The following parameters are automatically set to the
most efficient values for each pad when you select the
Trigger Type (p. 126), and don't require adjustment, except if
you experience any of the problems that are discussed in
the explanation of each parameter.
1.
Press the [TRIGGER] button .
The [TRIGGER] button will light.
2.
Press the [F5] (ADVANCE) button .
If [F5] (ADVANCE) is not shown, press the [F1] (BANK)
button once to access the TRIGGER BANK screen.
3.
Use the [F1]–[F4] buttons to select the setting
that you want to make .
Button
[F1] (THRE) button
[F2] (RIM) button
[F3] (SCAN) button
[F4] (POSI) button
4.
Use the cursor [ ] [ ] buttons to select the
parameter .
5.
Select the pad that you want to edit .
Strike the desired pad, or use the TRIG SELECT buttons
to select it.
You can also use the cursor buttons to select the pad.
The edit screen for the selected pad will appear.
6.
Use the [–] [+] buttons or the dial to adjust the
setting .
7.
When you're finished, press the [KIT] button to
return to the DRUM KIT screen .
Explanation
Make advanced settings for pad
sensitivity.
Make advanced settings for rim
shots (p. 134).
Make advanced settings for trigger
signal detection (p. 134).
Make advanced settings for strike
position detection (p. 136).