Adjusting The Display Contrast [F5 (Lcd)]; Restoring The Factory Settings [F5 (F Reset)] - Roland V-Drums TD-20 Owner's Manual

2. Press [F4 (OPTION)] - [F2 (COMP/EQ)].
The "MASTER COMP/EQ MODE" screen appears.
fig.10-Master_70
3. Use [+/-] or [VALUE] to make settings.
INDIVIDUAL: Master effect for each kit, individually.
GLOBAL: Master effect common to other drum kits
is used.
When this is set to "GLOBAL," "GLOBAL" appears on the
icon at the left part of the master effect setting screen.
fig.10-Master2_70
Adjusting the Display Contrast
[F5 (LCD)]
The display contrast is strongly influenced by the location of
the TD-20 and the lighting of the room it's in. Adjust this
parameter when needed.
1. Press [SETUP].
[SETUP] lights.
2. Press [F4 (OPTION)] - [F5 (LCD)].
The "LCD CONTRAST" screen appears.
fig.10-Display_70
3. Use [+/-] or [VALUE] to adjust.
* You can also adjust it by holding [KIT] and turning [VALUE].
Restoring the Factory
Settings [F5 (F RESET)]
This restores the TD-20 to the original factory settings
(Factory Reset).
All data and settings stored in the TD-20 are lost in
carrying out this operation. So if necessary, save your
data to a memory card or an external MIDI device before
executing the factory reset (p. 70, p. 77).
Chapter 10. Settings for the Entire TD-20 [SETUP]
1. Press [SETUP] - [F5 (F RESET)].
[SETUP] lights, and the "FACTORY RESET" screen
appears.
fig.10-Factory1_70
2. Press [F5 (RESET)].
The confirmation screen appears.
fig.10-Factory2_70
* To cancel, press [F1 (CANCEL)].
3. Press [F5 (EXECUTE)] to execute Factory
Reset.
When Factory Reset is finished, the following screen appears.
fig.10-Factory3_70
* If you do not want to adjust the VH Offset parameter, press [F1
(CANCEL)].
4. Press [F5 (ADJUST)].
The "VH OFFSET ADJUSTMENT" screen appears.
fig.05-VHOffset1_70
5. Loosen the clutch of the top hi-hat and let it sit
on the bottom hi-hat.
* Do NOT touch the hi-hats or the pedal.
6. Press [F5 (EXECUTE)].
The VH Offset parameter is set automatically.
fig.05-VHOffset2_70
When finished, the "DRUM KIT" screen appears.
When Factory Reset is carried out, the [GROUP FADERS]
settings values are set to the maximum volume,
regardless of the slider positions.
81