Introduction - Mira Extreme Thermostatic Installation And User Manual

Thank you for purchasing a quality Mira product. To enjoy the full potential of your
new shower, please take time to read this guide thoroughly, and keep it handy for
future reference.
The Mira Extreme Thermostatic is a surface mounted all-in-one thermostatic power
shower. It is designed for use with a mains voltage electrical supply and gravity
fed hot and cold water supplies. It features a built-in pump unit, thermostatic mixer
assembly and separate power, flow buttons and temperature control.
The thermostatic mixer assembly responds to changes in incoming water temperature
to maintain the showering temperature selected. The temperature control is preset
to give a maximum showering temperature of 41°C. However, it can be adjusted to
suit installation or user requirements.
An override button is fitted to the temperature control. This allows the user to override
the maximum temperature and select higher showering temperatures. The button
can be disabled, if required.
The product is fitted with a 15 mm dual entry push-fit inlet manifold which allows
pipe connections to the top, bottom or rear of the power shower. The inlet manifold
also contains inlet filters and check valves.
The shower control is supplied with Mira Logic power shower fittings. These fittings
consist of an adjustable spray handset with four different spray actions (start,
champagne, massage and economy), flexible hose, adjustable clamp bracket
assembly, slide bar and supports, hose retaining ring and wall mounted soap dish.
The fittings are available in a white/chrome or all white finish.
The Mira Extreme is not suitable for use in institutional/commercial applications. It
must not be used with mains water pressure applications; for example, instantaneous
electric heaters, instantaneous gas water heaters, unvented mains pressure systems,
pumped shower systems and some combination-type storage systems.
If you experience any difficulty with the installation or operation of your new power
shower, please refer to 'Fault Diagnosis', before contacting Kohler Mira Ltd. Our
contact details can be found on the back cover of this guide.

INTRODUCTION

3