Table of Contents
Advertisement
mira 415 pressure Balanced shower Control range
description
A range of Mira
1
for variations in inlet pressures to maintain a constant outlet temperature provided
the inlet water temperatures remain stable.
The Mira 415 is not a thermostatic shower control and does not sense supply
temperature variations. Therefore, inlet water temperatures especially the hot, should
be relatively constant.
The Mira 415 is suitable for installation with the following packages:-
–
Fully modulating multi-point gas water heaters.
–
Fully modulating combination boilers.
–
Unvented mains pressure systems.
–
Mains pressurised, instantaneous hot water heated from thermal store,
systems.
–
Pumped systems.
Showering temperature is adjusted by the shower control. The flow rate is determined
by the supply pressures available at the inlets, and the output rating of the heater
appliance.
product range
mira 415:
Surface mounted pressure balanced shower control for connection to
exposed pipework, for high pressure applications (1.0 – 5.0 bar).
White/chrome or white/light golden colour models are available.
mira 415B: Built-in shower control for connection to concealed pipework, for
high pressure applications (1.0 – 5.0 bar). White/chrome or white/
light golden colour models are available.
WarnIng!
Products manufactured by us are safe and without risk provided they are installed,
used and maintained in good working order in accordance with our instructions and
recommendations.
safety
Anyone who may have difficulty understanding or operating the controls of any
shower should be attended whilst showering. Particular consideration should be
given to the young, the elderly, the infirm or anyone inexperienced in the correct
operation of the controls.
InTroduCTIon
/
" pressure balanced shower controls which automatically adjusts
2
3
Hide quick links:
Advertisement
Table of Contents
