Introduction; Safety : Warnings - Mira Discovery Installation And User Manual

The Discovery Thermostatic Shower Control with independent selection for temperature
and spray force.
Mira Discovery Exposed: Shower control for connection to rising, falling or rear
entry pipework.
Mira Discovery Built-in: Shower control for connection to concealed pipework.
This product has been certified as a Type 2 valve under the BUILDCERT TMV2
scheme. This product also complies with the water supply (water fittings)
regulations 1999.
This Discovery Thermostatic Shower Control is precision engineered and should give
continued safe and controlled performance, provided:
1. It is installed, commissioned, operated and maintained in accordance with
manufacturers recommendations.
2. Periodic attention is given, when necessary, to maintain the product in good
functional order.
Caution!
1. Read all of these instructions.
2. Retain this guide for later use.
3. Pass on this guide in the event of change of ownership of the installation site.
4. Follow all warnings, cautions and instructions contained in this guide.
5. Anyone who may have difficulty understanding or operating the controls of any
shower should be attended whilst showering. Particular consideration should be
given to the young, the elderly, the infirm or anyone inexperienced in the correct
operation of the controls.
6. When this product has reached the end of it's serviceable life, it should be
disposed of in a safe manner, in accordance with current local authority recycling,
or waste disposal policy.
If you experience any difficulty with the installation or operation of your new shower
control, then please refer to "Fault Diagnosis", before contacting Kohler Mira Limited.
Our telephone and fax numbers can be found on the back cover of this guide.
For latest prices and delivery to your door visit MyTub Ltd - www.mytub.co.uk - info@mytub.co.uk 0844 556 1818

INTRODUCTION

SAFETY : WARNINGS

3