Operation - Mira Extreme Thermostatic Installation And User Manual

For safety reasons this appliance is fitted with an adjustable maximum temperature
setting. This setting must be checked and adjusted as necessary to suit both site
conditions and user's comfort. Refer to section: 'Commissioning'.
1.1 Push the lower flow control button to
start the flow of water.
1.2 Press the correct flow control knob
to obtain the desired flow of water.
1.3 Turn the temperature control knob
in the direction of the red indicator
(anticlockwise) for warmer water and
in the direction of the blue indicator
(clockwise) for cooler water, until
the desired temperature of water is
achieved.
Warning! Operation of the override
button will allow a shower temperature
above the preset maximum.
1.4 To override the preset maximum
temperature depress the override
button and turn the temperature knob
anticlockwise.
1.5 Press the Stop button to stop the flow
of water.
Note! If the Mira Extreme is used
continuously for a prolonged period
the self-resetting thermal trip fitted
to the appliance may operate. This
will shutdown the pump motor and
prevent it from overheating.

OPERATION

27
Press top
button to start
FLOW
high flow of
water.
Flow
Press middle
High
button to start
Medium
medium flow
of water.
Low
Press bottom
button to start
low flow of
water.
TEMPERATURE
Turn
clockwise for
cooler water.
Turn
anticlockwise
for warmer
water.
Press override
button to
override
maximum
temperature
stop.
Stop
Press to stop
the flow of
water.
=
=
=