Table of Contents
Advertisement
Fan
Description
Fan
Before removing the fan, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet, and
then unplugging the AC adapter from the computer.
4.
Remove the bottom cover (see
5.
Remove the battery (see
6.
Remove the keyboard (see
Remove the fan:
NOTE:
To remove the fan you must remove screws from both the top (under the keyboard) and bottom of
the computer.
1.
Position the computer upright and open as far as possible.
2.
Remove the two Phillips M2.0×3.0 screws that secure the fan to the computer.
3.
Close the computer and position it upside down.
4.
Disconnect the fan cable from the system board (1).
5.
Loosen the three captive Phillips screws (2) that secure the fan to the computer.
Bottom cover on page
Battery on page
40).
Keyboard on page
50).
38).
Component replacement procedures
Spare part number
L13679-001
65
Advertisement
Table of Contents
