Appendix C. System Configurations Chart; Step 1: Configure Network; Table C-A. Control Pin Connection Configuration Chart For Network Interface - ADTRAN TSU 120 User Manual

Step 1: Configure Network.

Control Pin Connection Configuration Chart for Network Interface
MENU ITEM
1)FORMAT
2)CODE
3)YEL ALARM
4)XMIT PRM
5)TIMING MODE
6)LINE BUILD OUT
7)INBAND LOOPBK
8)BIT STUFFING
*= Factory Default
61200.129L1-1
System Configurations Chart
This appendix contains tables to support the chapter,
Example Operations. Five steps/tables are provided to
aid in configuring the system.
SELECTION USED
TSU 120 User Manual
Appendix C. System Configuration Charts
Appendix C
SELECTIONS AVAILABLE
D4, ESF*
AMI, B8ZS*
ENABLE*, DISABLE
ON, OFF*
NETWK* (NI), INTERNAL, BASE DTE, BASE
DSX-1,
SECONDARY INTERFACE, NORMAL
0 dB*, 7.5 dB, -15 dB, -22.5 dB, AUTO
ACCEPT*, REJECT
DISA*, ENA
Table C-A
115