Configuring the Ports
61200.129L1-1
Scroll to select Yes, and press Enter to confirm Apply.
The unit displays Map Applied as the map just created
is written into Map A and will be used to pass data.
The entire map can be cleared by first selecting CREATE,
which has all DS0s set to PSTRU=N and PORT=IDLE,
and then select APPLY to write the Idle map into the
Current map.
Use Cancel to exit DS0 Map A and return to the
Config menu.
Scroll down or use the number 7 to move the cursor to
7)PORT CONFIG. Press Enter to activate the Port
Configuration menu item (see Figure 4-13).
Window Showing Port Configuration Option
Press Enter to enter the Base Nx Configuration menu
(see Figure 4-14).
(First Selection in the Base Nx Configuration Menu)
TSU 120 User Manual
Chapter 4. Example Operations
Figure 4-13
Figure 4-14
Screen Used To Change Mode
103