Table of Contents
Advertisement
Chapter 3. Operation
View History
This menu item displays date and time history of up
to 20 status changes of the unit.
Port Status
Port Status is used for viewing the signals being
monitored on the data ports.
Remote Port
Shows status of incoming commands on the chain in
port.
Configuration (CONFIG)
The Configuration menu is used to set the TSU 120
operational configuration. This menu includes the
following items:
Network (NI)
This item is selected to set all of the parameters
associated with the network interface located in the
base unit.
Unit
Unit is used to set the TSU 120 control port baud rate
and to set up the dial out function for network alarm
traps.
Map Exchange (Map XCHANG)
This item sets up and activates an automatic DS0 map
switch based on time of day.
Map In Use
This item is used to display and manually switch the
DS0 map being used.
DS0 Map: A (B)
Selects DS0 Map (A or B) to designate which DS0s are
assigned to which data port.
Port Configuration (Port Config)
This menu is used to configure the parameters associ-
ated with any data port in the unit.
4 9
61200.129L1-1
TSU 120 User Manual
Advertisement
Table of Contents
