Table of Contents
Advertisement
Configuration (CONFIG)
1) NETWORK (NI)
2) UNIT
3) MAP EXCHANGE
4) MAP IN USE: A (B)
2) CONFIG
5) DS0 MAP A
6) 0.2 DS0 MAP B
7) PORT CONFIG
61200.129L1-1
The Configuration menu is used to set the TSU 120
operational configuration, including all network
interface parameters and the allocation of the DS0s
and the port parameters. See Figure 3-11.
1) FORMAT
2) CODE
3) YEL ALARM
4) XMIT PRM
5) TIMING MODE
6) SET LBO
7) INBAND LPBCK
8) BIT STUFFING
OFF
AUTO
1) COPY B > TEMP
2) CREATE TEMP
3) REVIEW MAP B
4) REVIEW TEMP
5) EDIT TEMP
6) APPLY TEMP > B
0.1 Nx56/64
0.2 DSX-1
(OPTION PORTS)
TSU 120 User Manual
Chapter 3. Operation
1) CNTRL PORT
2) TRAPS
3) ACCESS
4) MODEM INIT
5) EXIT TERM MODE
1) MAP A @:HH:MM
2) MAP B @:HH:MM
1) COPY A > TEMP
2) CREATE TEMP
3) REVIEW MAP A
4 )REVIEW TEMP
5) EDIT TEMP
6) APPLY TEMP >A
1) RATE 56/64
2) TX CLK CNTRL
3) DATA
4) CTS
5) DCD
6) DSR
7) "0" INHIB
8) INBAND
1) FORMAT
2) CODE
3) YEL ALARM
4) LINE LENGTH
5) INBAND LPBCK
6) ROB BIT SIG
Figure 3-11
Configuration Menu Tree
6 1
Advertisement
Table of Contents
