Using Your Phone With The Cordless Module And Accessories - Mitel 5330 User Manual

5330/5340 IP Phones – User Guide
USING YOUR PHONE WITH THE CORDLESS
MODULE AND ACCESSORIES
The cordless handset and cordless headset provide users with the capability to move around
within their own office or adjacent offices while using the telephone.
Both cordless devices connect to your IP telephone through the cordless module, which
attaches to the back of the phone. The cordless headset rests and recharges in a headset
cradle that attaches to the side of the telephone. The cordless handset recharges in the
handset cradle.
The Cordless Devices Application (see page 101) provides access to the configuration
settings and information screens that apply to the cordless module and accessories.
Note: Since only one module type can be attached to the phone at any given time, you
can not, for example, use a 5310 Conference Module when the Cordless Module is
attached.
CAUTION: Attempting to remove the back plate on the telephone to install the
Cordless Module before disconnecting the telephone's power supply may damage the
telephone. For information about installing the Cordless Module, see the Cordless
Module and Accessories Installation Guide for Mitel 5330/5340 IP Phones available at
Mitel OnLine.
Figure 1. Cordless Module and Accessories on 5300 Series Phone
- 92 -