Using Your Phone With The Cordless Module And Accessories - Mitel 5330e User Manual

Communications director
Hide thumbs Also See for 5330e:
Table of Contents

Advertisement

USING YOUR PHONE WITH THE CORDLESS
MODULE AND ACCESSORIES
Cordless handsets and cordless headsets provide you with the capability to move around
within your own office or adjacent offices while using your phone.
These cordless devices connect to your IP phone through a Mitel Cordless Module, which
attaches to the back of the phone. There are two Cordless Module types available: Digital
Enhanced Cordless Telecommunications (DECT) and Bluetooth
Module works with the Mitel DECT Cordless Handset and Mitel DECT Cordless Headset. The
Bluetooth Module works with the Mitel Bluetooth Handset and most third-party Bluetooth
headsets.
The Mitel Cordless Handsets (both DECT and Bluetooth) recharge in the handset cradle. The
Mitel Cordless Headset (DECT only) rests and recharges in a headset cradle that attaches to
the side of the phone.
The Cordless Devices Application (see page 83) provides access to the configuration settings
and information screens that apply to the cordless module and accessories.
Note: Since only one module type can be attached to the phone at any given time, you
cannot, for example, use a 5310 Conference Module when a Cordless Module is
attached.
CAUTION: Attempting to remove the back plate on the phone to install a Cordless
Module before disconnecting the phone's power supply may damage the phone. For
details on installing a Cordless Module, see the appropriate Cordless Module and
Accessories Installation Guide for Mitel 5330e/5340e/5360 IP Phones included with the
module and available at Mitel OnLine.
DECT Cordless Module and Accessories on 5300 Series IP Phone
5330e/5340e IP Phones – User Guide
- 71 -
®
. The DECT Cordless

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

5340e

Table of Contents