Using Your Phone With The Cordless Module And Accessories - Mitel 5330 IP User Manual

5330/5340 IP Phones – User Guide
USING YOUR PHONE WITH THE CORDLESS
MODULE AND ACCESSORIES
The cordless handset and cordless headset provide users with the capability to move around
within their own office or adjacent offices while using the telephone.
Both cordless devices connect to your IP telephone through the cordless module, which attaches
to the back of the phone. The cordless headset rests and recharges in a headset cradle that
attaches to the side of the telephone. The cordless handset recharges in the handset cradle.
The Cordless Devices Application (see page 92) provides access to the configuration settings and
information screens that apply to the cordless module and accessories.
Note: Since only one module type can be attached to the phone at any given time, you can not
use a Programmable Key Module (PKM) when the Cordless Module is attached.
CAUTION: Attempting to remove the back plate on the telephone to install the Cordless
Module before disconnecting the telephone's power supply may damage the telephone. For
information about installing the Cordless Module, see the Cordless Module and Accessories
Installation Guide for Mitel 5330/5340 IP Phones available at Mitel OnLine.
Figure 1. Cordless Module and Accessories on 5300 Series Phone
81