Using Your Phone With The Cordless Module And Accessories - Mitel MiVoice 5360 User Manual

Hide thumbs Also See for MiVoice 5360:

Table of Contents

MiVoice 5360 IP Phone User Guide

Using Your Phone with the Cordless Module and

Accessories

Cordless handsets and cordless headsets provide you with the capability to move around within

your own office or adjacent offices while using your phone.

These cordless devices connect to your IP phone through a Mitel Cordless Module, which

attaches to the back of the phone. There are two Cordless Module types available: Digital

Enhanced Cordless Telecommunications (DECT) and Bluetooth

works with the Mitel DECT Cordless Handset and the Mitel DECT Cordless Headset. The

Bluetooth Module works the Mitel Bluetooth Handset and most third-party Bluetooth headsets.

The Mitel Cordless Handsets (both DECT and Bluetooth) recharge in the handset cradle. The

Mitel Cordless Headset (DECT only) rests and recharges in a headset cradle that attaches to the

side of the phone.

The Cordless Devices Application

settings and information screens that apply to the Cordless Module and accessories.

Note: Since only one module type can be attached to the phone at any given time, you

cannot, for example, use a 5310 Conference Module when a Cordless Module is attached.

Attempting to remove the back plate on the phone to install a Cordless Module before

disconnecting the phone's power supply may damage the phone. For details on installing a

Cordless Module, see the appropriate Cordless Module and Accessories Installation Guide for

MiVoice 5330/5340/5360 IP Phones included with the module and available at Mitel OnLine.

CAUTION:

(see page 91) provides access to the configuration

. The DECT Cordless Module

Table of Contents