Answer a Call
Do one of the following:
•
Lift the cordless handset.
•
If the handset is already out of the cradle, press the hookswitch button on the handset.
Note: If you have a call on hold on your Prime Line and answer another on a Line
Appearance key, it will be presented over the speaker.
Hang up
Do one of the following:
•
Replace the cordless handset in the cradle.
•
Press the hookswitch button on the handset.
Dialing – Auto Dial Disabled
To dial a number with Auto Dial disabled:
1. Lift the handset or press the hookswitch.
2. Make the call using the dial pad, or press a programmed speed dial key on the phone.
Dialing – Auto Dial Enabled
To dial with Auto Dial enabled:
•
To dial the predefined Auto Dial number, press the hookswitch on the cordless handset
or headset.
To program Auto Dial, refer to Using the Cordless Devices Application on page 101.
Alerting Tones and LEDs
The cordless accessories provide the following alerting tones:
Feature
Mute key on cordless device
ON/OFF
Mute key on Phone ON/OFF
Low battery (within 10 minutes left)
Low battery (within 2 minutes left)
2-pitch tone occurs immediately. Reminder tone occurs 30
seconds after activation and then regularly until deactivated.
No immediate tone. Reminder tone occurs 30 seconds after
activation and then regularly until deactivated.
3 beeps and 20 second pause repeated 3 times
3 rapid beeps and 1.5 second pause repeated 3 times
- 97 -
5330/5340 IP Phones – User Guide
Function