Using Your Phone With The Cordless Module And Accessories - Mitel 5320e User And Administrator Manual

5320e/5330e/5340e SIP User and Administrator Guide
Using Your Phone with the Cordless Module and
Accessories
Cordless handsets and cordless headsets provide you with the capability to move around within
your own office or adjacent offices while using your phone.
These cordless devices connect to your IP phone through a Mitel Cordless Module, which
attaches to the back of the phone. There are two Cordless Module types available: Digital
Enhanced Cordless Telecommunications (DECT) and Bluetooth
works with the Mitel DECT Cordless Handset and the Mitel DECT Cordless Headset. The
Bluetooth Module works the Mitel Bluetooth Handset and most third-party Bluetooth headsets.
The Mitel Cordless Handsets (both DECT and Bluetooth) recharge in the handset cradle. The
Mitel Cordless Headset (DECT only) rests and recharges in a headset cradle that attaches to the
side of the phone.
The Cordless Devices Application (see page 55) provides access to the configuration settings
and information screens that apply to the cordless module and accessories.
The 5320e IP phone does not support the Cordless Modules.
Note:
Note: Since only one module type can be attached to the phone at any given time, you cannot, for
example, use a 5310 Conference Module when a Cordless Module is attached.
CAUTION: Attempting to remove the back plate on the phone to install a Cordless
Module before disconnecting the phone's power supply may damage the phone. For
details on installing a Cordless Module, see the appropriate Cordless Module and
Accessories Installation Guide for Mitel 5320e/5330e/5340e SIP Phones included with
the module and available at Mitel OnLine.
- 42 -
®
. The DECT Cordless Module