Table of Contents
Advertisement
if
2.
3.
4.
5.
6.
Front Panel
Roland
2
3
4
Rear Panel
Gl -10
GUITAR-MIO INTERFACE
=
iin
Oo
oa
VALUE
"PARAMETER
MAP
:
=
+
P. PLAY MODE
G=GK / IN=MIDI IN
——
sa
Cc. MIDI CH
1-16
AON i
coco nance
os aes
1, POLY/MONO
= ON#POLY/OFF= MONO
"OFF
2.
OCTAVE
SHIFT
dn.nrUP
PARAMETER
3.
BEND D. THIN
— ofinron
-
+
4. ATTACK N. FLT
ON/OFF
a
—
5. PEDAL ASSIGN
ON=EXP / OFF=MOD
ll]
6 TOUCH SENS = FiinrHa,nd
7, PICKUP SENS
1-8
6
8. MASTER TUNE
ON=442/OFF=440
9, TUNER
POWER
DC9V 260mA
©
HOLD
EXP PEDAL
GK IN Connector
Accepts connection of a special cable with a 13-pin
connector that links this unit with the synthesizer
driver (GK-2A; sold separately).
Note: The older GK-2 type can also be used.
MIC IN Jack
Used to connect microphones and guitars.
MIC LEVEL Knob
Used to adjust the input level of equipment con-
nected to MIC IN.
Display
Displays the parameter number and its current
value. Acts as a meter when using the tuner func-
tion or when adjusting the sensitivity.
Value Buttons (+ and — )
Used to increment/decrement
the value for the
current parameter, or turn on/off a setting.
* Don't turn off the power while changing a
value.
Parameter Buttons (+ and — )
Pressed to switch among parameters.
Power Switch
Turns on/off the power to the GI-10.
Power Supply Jack
Accepts connection of the supplied AC adapter.
CAUTION: Never use any AC adapter other than
the one supplied.
MIDI Connectors (IN / OUT)
These connectors are used to connect the GI-10
with external devices using MIDI cable. You need
to run a cable from MIDI OUT to your external
sound generating unit or sequencer in order to
have this unit's MIDI data be sent to it, and to pro-
duce the guitar's sound or obtain other kinds of
control.
10.Hold Jack (HOLD)
11.
A pedal switch (DP-2, BOSS FS-5U; sold separate-
ly) can be connected to allow you to use hold
effects on external MIDI device.
Expression
Panel
Jack
(EXP
PEDAL)
Connect a pedal (EV-5; sold separately) here to
contro] the volume of an external device, or obtain
vibrato effects.
Advertisement
Table of Contents
