Lcd Messages - Canon FAX-L220 User Manual

LCD Messages

The following messages are displayed in the LCD when the FAX is performing a
task, or when it encounters an error. The error code appears in the ACTIVITY
REPORT (
Messsage
AUTO REDIAL
BUSY/NO SIGNAL
CHANGE CARTRIDGE
13 8 Troubleshooting
p. 11 3).
Error Code Cause
— The unit is waiting to redial
the other party's fax
number because the line
was busy or the other party
did not answer when you
tried to send the document.
#018 The fax/telephone number
you dialled is busy.
The fax number dialled
was incorrect.
The other party's fax
machine is not working.
The other party is not using
a G3 fax machine.
The telephone line type
setting on your unit is
incorrect.
The receiving fax machine
did not answer within
55 seconds (after all
automatic redialling
attempts).
— The toner inside the toner
cartridge may be unevenly
distributed.
The toner cartridge is
empty.
Action
Wait for the unit to automatically
redial the fax number (
Try sending the document at a later
time.
Check the fax number and dial again.
Contact the other party and have them
check their fax machine.
Contact the other party to check that
they are using a G3 fax machine.
Set your unit for your telephone line
type ( p. 3 8).
Contact the other party and have them
check their fax machine. You can try
to send the document using manual
sending via the handset (
For an overseas call, add pauses to the
registered number ( p. 9 2).
Redistribute the toner inside the toner
cartridge ( p. 12 6). If the message
remains, replace the toner cartridge
( p. 12 6).
Replace the toner cartridge
( p. 12 6).
p. 7 9).
p. 7 6).
Chapter 13