Figure F.4: Mpx1500 Mounting Bracket - Avocent Emerge MPX Installer/User Manual

MIS-E standard is designed for mounting of mid-size displays that weigh under 50 pounds.
Compliant products, such as the MPX1000 transmitter and receiver, are equipped with a 200 x
100mm mounting hole pattern.
Please follow the mounting instructions provided with the third-party mounting kit.
Mounting options for MPX1500 extenders
Wall and table mounting
An optional keyhole style mounting bracket (part number DMK-04) is available for use with
MPX1500 extenders that allows for wall mounting. The bracket also provides screw slots for
table mounting.

Figure F.4: MPX1500 Mounting Bracket

To install the mounting bracket:
1. Use the bracket as a template to mark desired holes on the mounting surface.
2. Insert mounting screws into the drilled holes.
3. Attach the bracket to unit using the supplied pan head machine screws.
NOTE: Take care to orient the bracket such that the narrow portion of keyhole slot will interlock with the heads of
the mounting screws when the unit suspended upon them.
4. Slots on outer edge of bracket can be used after the bracket is installed to unit. Hold unit /
bracket against the mounting surface and drive screws thru slots. Screws along bottom edge
should be installed before plugging in cables.
Appendices 81