Chapter 4: Additional Functions
45
Figure 4.1: Transmitter Tuning Parameters - Basic Settings
If you click on Show Default Values, the web page will be updated to display factory default values.
To save these values, click on Apply.
If you click on More Settings, additional parameters will be displayed. These additional parameters
allow you alter the ramp up and down rates. Under most conditions, these settings should not be
required. Should the basic tuning parameters be insufficient to resolve issues in your environment,
contact Avocent technical support for additional suggestions.
Receiver tuning parameters
The Tuning Parameter web page on MPX receivers, illustrated in Figure 4.2, allow fine
adjustments to be made to audio and video signal timing. It is also possible to restrict the amount of
retransmission data that a receiver will request.