Table C.3: Led Status - Reset Button Press; Table C.4: Led Status - Flash Update - Avocent Emerge MPX Installer/User Manual

Reset button status
You may perform multiple levels of reset using the button on the front panel of the receiver. As you
continue to hold the button the LED pattern will change, reflecting the action to be performed. The
various LED patterns are described in the following table:

Table C.3: LED Status - Reset Button Press

All LEDs blinking or
flashing together
Rate: 2 blinks per
second
Rate: 4 flashes per
second
Rate: 10 flashes per
second
The same reset functions are available on the MPX transmitter; however, status is provided via the
front panel display.
Flash update status
LED indicators provide the following status information during the flash update process:

Table C.4: LED Status - Flash Update

Flash update state
In Progress
Failed
Rear status LEDs
Some MPX receivers feature two green LEDs on the rear panel. These LEDs offer a subset of status
information and are most useful when an installed MPX receiver is oriented such that the front
panel LEDs are not visible. The following diagram illustrates the order and color of the LEDs:
Hold time Interpretation
If the reset button is released now, the MPX receiver will reset
.25 - 5 seconds
and reboot without changing any configuration parameters.
If the reset button is released now, the MPX receiver will reset its
5 - 10 seconds
login password to factory default and then it will reset and reboot.
If the reset button is released now, the MPX receiver will reset all
>10 seconds configuration parameters to factory defaults and then it will reset
and reboot.
LED Activity
Green-2 LED flashing indicates that the flash update is in progress and that it has not
failed. While this LED is flashing, one or more of the green or amber LEDs will also
either be on solid or will be blinking to indicate the progress of the flash update.
Red LED flashing indicates failure of the flash update procedure. If you are unable to
identify the source of the failure, please contact technical support for assistance.
Appendices 71