Media Lan Performance - Avocent Emerge MPX Installer/User Manual

58 MPX Extender Installer/User Guide
Table 4.4: Status Page Information (Continued)
Field
RGB Video
Resolutions
Stored
Signal Strength
Indication
Frame Rate

Media LAN performance

Refer to Video Troubleshooting on page 74 for information regarding the Media LAN
Performance table.
Tx /
Rx Description
Tx Resolutions that are currently stored in the Active EDID string of the transmitter.
This field is present for VGA display devices only.
Rx An indication of the wireless signal strength on the receiver unit. Only displayed
on wireless A/V networks. Ranges from 0 to 100, with 0 representing weak signal
strength and 100 representing maximum signal strength. A graphical display is
also provided as follows:
• Poor signal – No bars or one red bar
• Passable signal quality – A red bar and one or two yellow bars; signal quality
should be improved
• Good signal quality – A red bar, two yellow bars and one or two green bars
Rx The video frame rate on the receiver unit. With no lost frames, the frame rate will
alternate between 29 and 30 frames per second. Wireless bandwidth contention
and poor signal quality may result in lower frame rates. Refer to Methods for Fine
Tuning on page 47 for tips on restoring acceptable frame rates.