Figure 3.7: Bound Receiver Status
Final Adjustments
Presentation of audio and video media should now be active at each display device, as if they were
each individually attached to the source device. Inspect each display for signs of hesitation, color
shift, audio loss, or other anomalies. Refer to System Tuning on page 43 for additional information.
Extension of IR and Serial Data
After mounting your MPX extenders, continue with the next chapter if you intend to use the
extension network to pass serial or IR control signals.
Change Password
During authentication, the browser asks for your password. The Change Password page lets the
administrator change the password.
NOTE: The password dialog box displays bullets or asterisks while you type information. If a secure connection
is not used, the browser sends the unencrypted password to the Web server during this configuration process.
Credentials are always encrypted during subsequent logons.
To change the password:
1.
Type the old login password.
2.
Type the new login password. The length of the password must be between 0 and 31
characters. The password may contain any combination of letters, digits, and
printable characters.
NOTE: When you are typing a password, the case is significant.
3.
Type the new login password again. Both password parameters must match.
4.
Click Apply.
Chapter 3: Installation
41