Figure 2.5: Emerge Mpx1000 Receiver (Rear); Table 2.5: Rear Panel (Receiver) - Avocent Emerge MPX Installer/User Manual

18 MPX Extender Installer/User Guide
Table 2.4: Front Panel ( (Continued)Receiver) (Continued)
Item
Status Lights
USB Port
Power (PWR)

Figure 2.5: Emerge MPX1000 Receiver (Rear)

Table 2.5: Rear Panel (Receiver)

Item
L1 Ethernet Port
L2 Ethernet Port
Serial Port
Power
USB Port
Serial
Power
USB
L1
Description
Five colored LEDs that communicate the current state of the
device. Located on the front panel in the following order (left to
right): RED AMBER1 AMBER2 GREEN1 GREEN2
See MPX Status LEDs on page 69 for a detailed description of
LED status indicators
USB type A; reserved for future use
Indicates that power is connected and turned ON
Media Module Slot
L2
Description
RJ 45, 10/100 Ethernet for web-based management of the
MPX1000 receiver.
RJ 45, 10/100 Ethernet for sending video data from the
transmitter to all bound receivers
RS-232, 9 pin serial port to support serial passthrough for
control of display devices
Power socket with built-in fuse and on/off switch
USB Type B; reserved for future use