Mpx1000 Media Modules; Hdmi Media Module - Avocent Emerge MPX Installer/User Manual

Hd multipoint extender
Hide thumbs Also See for Emerge MPX:
Table of Contents

Advertisement

Table 2.7: Rear Panel (Receiver) (Continued)
Item
Serial Port
Ethernet LAN Port
Universal A/V Port
RCA Audio
Toslink Audio

MPX1000 Media Modules

Two types of media modules exist for MPX1000 extenders, as follows:
NOTE: Media modules are not required for MPX1500 extenders.
Input media modules for MPX1000 transmitters
Output media modules for MPX1000 receivers (shown below)
Media received from a source device at the input module of the transmitter is processed and passed
to bound receivers where it is properly converted and sent to display devices through the output
media module. Media modules must be installed in all MPX1000 extenders for proper operation.
NOTE: With your MPX1000 unit you have received two snap-on ferrites. If you are using the analog audio (RCA
Jacks) these ferrites should be applied to each end of the cables. Apply the ferrites approximately one inch from
the cable ends. One ferrite goes around both cables.

HDMI media module

The HDMI media module supports both HDMI and DVI-D signalling. HDMI functionality
includes support for HDMI video, embedded audio, EDID passing, digital rights management
(HDCP) and device control (CEC). DVI-D functionality includes video, external audio, EDID
passing and HDCP. DVI-D connectivity requires an DVI-HDMI adapter, which is included with
the media module.
Description
RJ45 connector for attachment of optional DB9-UNI or DB9-
DUAL adapter. The dual adapter splits the port into two RS-232
DB9 female connectors. Supports serial passthrough for control
of display devices.
RJ 45, 10/100 Ethernet that provides combined media and
control LAN functionality
A DVI-I connector that provides connectivity to a wide range of
display devices, including: HDMI, DVI-D, DVI-A, VGA,
component, composite and s-video
Provides support for unbalanced analog stereo (left and right)
audio. Depending upon your firmware revision, the right channel
offers support for S/PDIF coaxial digital audio.
Toslink connector that, depending upon your firmware revision,
provides support for optical S/PDIF digital audio
Chapter 2: Hardware Overview
21

Advertisement

Table of Contents
loading

Table of Contents