Avocent Emerge MPX Installer/User Manual page 71

Table 4.4: Status Page Information (Continued)
Tx /
Field Rx
Control LAN MAC Both L1 MAC address (control LAN) of the transmitter or receiver, also printed on an
Address
Wired Media LAN Tx
MAC Address
Serial Number Tx
OEM ID Tx
Country Code Both The country code for the product. See Supported ISO Country Codes on page 97.
Product Type Both The product type for the unit: MPX1000T, MPX1000R or MPX1500R.
A/V Module Type Both The type of media that is detected or configured, such as HD15 or HDMI.
Operational Status Both For transmitters, this field will indicate the number of bound/active receivers. For
Session IP Both The media LAN IP address.
Address
Session Rx
Transmitter
Device Name
Wireless Channel Both The wireless channel number in use. Only displayed on wireless
Number
Actual Antenna Both The effective radiated power inclusive of extension attenuation and gains due to
Power
A/V Source Type Tx
A/V Source Tx
Resolution
A/V Encoder Tx
Running
A/V Source Error Tx
Primary Video Tx
Resolutions
Video Resolutions Tx
in Use
Description
external label on the unit.
L2 MAC address (media LAN) of the transmitter.
The serial number assigned to the unit.
The OEM identifier assigned to the unit. This information may be required for
technical support but is not required for normal use of the product.
receivers, this field will indicate if the receiver is currently connected to a
transmitter. For all units, this field will provide flash upgrade status.
The device name of transmitter to which this receiver is currently bound.
extension networks.
power settings and specialized antennas.
Type of source device: HDMI, DVI-D, VGA, Component.
Resolution, such as 1024x768 @60Hz, of the source device.
An indication that video is being encoded and transmitted in real-time.
Helpful diagnostic messages.
A list of all resolutions that the Primary Receiver has reported to the transmitter.
A list of resolutions that have been reported to the source device.
Chapter 4: Additional Functions 57