Twinax Options; Note; C01 - Axis 14363 User Manual

Twinax Options

Note:

C01

AXIS AFP IOP User's Manual
According to the SAA standard, it is not possible to run SCS and DSC/
DSE (non-IPDS) on IBM 3812/3816/4028 printers when operating in
the Twinax environment (AS/400,S/36,S/38). Therefore only two IPDS
related options are available in Twinax.
In the following an asterisk "*" will indicate the factory setting. The
number in the first column indicates the value to use in the utility
program or the IPDS parser, and the text in angular brackets
indicates the printer front panel value for the options. The values can
be text or numbers. The printer front panel menu texts are indicated
in angular brackets in the option headlines.
Country Character Sets and Code Pages .................. [c01 Country Code]
This option controls the default code page for IPDS.
(This table is continued on next page.)
0 [0-Intern.set5]
• 1 [1-USA/Canada
2 [2-Reserved ]
3 [3-Reserved ]
4 [4-Can.French ]
5 [5-Aus/Germany]
6 [6-Belgium ]
7 [7-Brazil ]
8 [8-Denmark/Nor]
9 [9-Finland/Swe]
10 [10-Italy ]
11 [11-Japan/Engl]
12 [12-Portugal ]
13 [13-Span.speak]
14 [14-UK ]
15 [15-Aus/Ger .2]
16 [16-Den/Nor .2]
17 [17-Fin/Swe .2]
18 [18-Spain .2]
19 [19-Japan/Kata]
20 [20-APL (293) ]
Section 5: Configuration Parameters
500 International Set 5
37 USA/Canada - English
500 Reserved
500 Reserved
260 Canadian French
273 Austria/Germany
274 Belgium
275 Brazil
277 Denmark/Norway
278 Finland/Sweden
280 Italy
281 Japan-English
282 Portugal
284 Spanish-Speaking
285 United Kingdom
286 Alternate Austria/Germany
287 Alternate Denmark/Norway
288 Alternate Finland/Sweden
289 Alternate Spain
290 Japan-Katakana
293 APL
35