Table of Contents
Advertisement
Section 5: Configuration Parameters
C06
C08
C09
26
Line Spacing ...............................................................[c06 Line Spacing]
Controls line spacing for non-IPDS Coax modes. In LU-1 mode the line
spacing can be changed by commands from the host.
• 0 [Single Space]
Single-line spacing
1 [Double Space]
Double-line spacing
IPDS Parser syntax (with default setting):
COAX_C06 = 0;
Monocase/Dualcase...............................................[c08 Mono/Dual-case]
Use this option to force upper case printing.
Used in DSC/DSE modes only.
• 0 [Dualcase]
Normal dualcase printing.
1 [Uppercase]
Always use upper case.
IPDS Parser syntax (with default setting):
COAX_C08 = 0;
Lines Per Inch (LPI)..................................................[c09 Lines per Inch]
Selects how many lines to print per inch. In LU1-1 mode this sets the
default power on value. In DSC/DSE modes this setting cannot be
overwritten.
• 0 [6 LPI]
6 LPI(8.57 LPI when COR active)
1 [8 LPI]
8 LPI(11.43 LPI when COR active)
2 [6.5 LPI]
6.5 LPI
IPDS Parser syntax (with default setting):
COAX_C09 = 0;
AXIS AFP IOP User's Manual
Advertisement
Table of Contents
