Table of Contents
Advertisement
Section 5: Configuration Parameters
C17
Note:
C18
C19
30
Suppress Timeout on No-Data-Loss IR .........................[c17 IR Control]
This option controls how to report special conditions such as paper-out,
toner-low etc. in DSC/DSE, LU-1 and IPDS modes.
Enabling this option will force reporting of Stacked Page Counter after
pages have been printed, i.e. operation will proceed as if IPDS Stacked
Page Counter was enabled.
• 0 [Disable]
No IR is sent on No-Data-Loss conditions.
1 [Enable]
Send Intervention Required to the host after some time if the con-
dition continues.
IPDS Parser syntax (with default setting):
COAX_C17 = 0;
or
INTERVENTION_REPLY = 0
Automatic New Line at MPP+1 ....................... [c18 Auto NL at MPP+1]
Used in DSC/DSE modes only.
0 [No]
No. When carriage return is executed at MPP+1, no automatic
New Line is executed. New print position is at the beginning of the
current line.
• 1 [Yes]
Yes. A carriage return on MPP+1 position causes a New Line to be
executed. New print position is at the beginning of the next line.
IPDS Parser syntax (with default setting):
COAX_C18 = 1;
Additional New Line at MPP+1....................... [c19 Add. NL at MPP+1]
0 [No]
No. When New Line is executed at MPP+1, then no automatic
New Line is executed. New print position is at the beginning of the
next line.
• 1 [Yes]
Yes. When New Line is executed at MPP+1, then an extra New
Line is executed. New print position is at the beginning of the line
which follows the next line. Used in DSC/DSE modes only.
IPDS Parser syntax (with default setting):
COAX_C19 = 1;
AXIS AFP IOP User's Manual
Advertisement
Table of Contents
