4028 Printable Area - Axis 14363 User Manual

4028 Printable
Area
Note:
AXIS AFP IOP User's Manual
4028 Printable Area ........................................................ [Printable Area]
This option controls what printable area is reported in the 0b Printer
Characteristics reply on the 4028 emulation.
This option is only used in 4028 emulation and is recommended to be
enabled.
• 0 [3812/3816] Normal. Printable area and paper size is the same
1 [4028] 4028 compatible. Printable area is smaller than the paper size.
Thereby allowing Host compensation of the reduced printable area
found on most laser printers.
2 [Print Page] Supports 4028 Print Page option. This option causes the upper left
corner (0,0) of the Logical page to be forced inside the 4028 Print-
able area.
IPDS Parser syntax (with default setting):
4028_PRINTABLE_AREA = 0;
Section 5: Configuration Parameters
55