Axis 14363 User Manual page 86

Appendix E: Installation
Note
Note
82
Thumb screw
Figure 16. Optra printer.
8. 4039 printers only:
Mount the metal cover for the Lexmark mainboard. First lift the cover
to fit the two pips up into the holes on the main board metal frame.
Slide the metal cover to the right and press on the lower part of the
cover to click it in above the two metal pips.
9. Close the right side cover and close the top cover. Connect the power
cord and power ON the printer.
10.Select [MENUS] on the frontpanel. Step true the menus until the sub-
menu [NETWORK MENU] appears and press the button next to this
menu text.
On non-Optra and non-4039 Plus models this menu is found under the
submenu [SETUP].
11.Enter the [LOCAL SETUP] menu and select [IPDS OPTIONS].
Select the desired IPDS emulation and press [SAVE]. Press
<RETURN> twice and select [TWINAX OPTIONS]. Enter the [C01
Country Code] option and select your national country code. Press
[SAVE] and press <RETURN> once.
Optra printer
AXIS AFP IOP User's Manual