Table of Contents
Advertisement
Note
Note
Download All
Download/Upload
Configuration
(*.CFN files)
Download
Program (Main
AFP IOP
Firmware)
AXIS AFP IOP User's Manual
Alternatively, the download sequence in the utility program can be
activated before the printer is powered ON. This way the interface will
detect the data at its serial port as the first step in the power ON routine,
and only run in upgrade mode.
The printer will display an error message after a while as the interface
only communicates with the serial port and not with the IOP port.
This does NOT affect the download.
Download All...................................................................[Remote Setup]
When selecting [Download All] the program will ask for the appropriate
files by showing a disk directory with the possible choices of files. The user
is prompted as explained under [Download Configuration], [Download
Program] and [Download Fonts].
Download/Upload Configuration (*.CFN files)...............[Remote Setup]
Any given configuration file with the file extension *.CFN can be
downloaded by using the [Download Configuration] option (or by
selecting Download All). A configuration can be uploaded from the
interface by selecting [Upload Configuration] in the [Upload] menu. If
changes have been made to the configuration file currently loaded into
memory, the program will automaticallly display a disk structure in order
to have the configuration saved before downloading. The file must have
the extension ".CFN". If no changes are made to a CFN file previously
loaded with [Open config file] the program will download this file. If no
CFN file has been loaded or no options have been changed prior to
selection of [Download Configuration], then the program will prompt for
a *.CFN file by showing a disk structure from where the file can be
selected. It is recommended to use the file DEFAULT.CFN. This file will
be created by the program if it does not exist in the same directory as the
AFPUTI.EXE program. If changes are made and saved into
DEFAULT.CFN, the factory setting can always be restored by deleting or
renaming this file and letting the utility program create a new file.
Download Program (Main AFP IOP Firmware) ..............[Remote Setup]
It is possible to download main program code to the interface using the
[Download Program] menu selection (or by selecting [Download All]).
Section 6: Download/Upload
59
Advertisement
Table of Contents
