Table of Contents
Advertisement
Section 5: Configuration Parameters
Printer Options
Note:
Top Margin
Left Margin
40
Use these options to change printer related items in the loaded config data.
Printer related items are margins, number of trays etc.
In the following an asterisk "*" will indicate the factory setting. The
number in the first column indicates the value to use in the utility
program or the IPDS parser, and the text in angular brackets
indicates the printer front panel value for the options. The values can
be text or numbers. The printer front panel menu texts are indicated
in angular brackets in the option headlines.
Top Margin ....................................................................... [Top Margin]
Top margin must be in the range -128 to 127. Unit is 1/300 of an inch.
Negative values indicates less top margin.
• 0 [-128..+127]
IPDS Parser syntax (with default setting):
FRONT_TOP_MARGIN = 0;
Left Margin.........................................................................[Left Margin]
Left margin can be adjusted in 1/300 of an inch, and a range of -128 to
127 units is allowed. Left margin is always located at the edge of the paper
to the left of the leading edge.
• 0 [-128..+127]
IPDS Parser syntax (with default setting):
FRONT_LEFT_MARGIN = 0;
AXIS AFP IOP User's Manual
Advertisement
Table of Contents
