Table of Contents
Advertisement
Section 6
Download/Upload
Note:
Download/Upload
Procedure
Important
AXIS AFP IOP User's Manual
Both the configuration, program and fonts can be downloaded to the
AXIS AFP IOP interface via the serial cable delivered with the interface.
Furthermore the configuration can be uploaded from the AFP IOP.
However all configuration settings can be altered from the Lexmark
frontpanel as well. The serial COM output used must be set in the
program [Setup] menu.
The interface automatically detects the baud rate selected in the utility
program. The baud rate is controlled by direct hardware access, i.e.
running the utility program under Windows could cause problems, as
Windows controls the serial ports in protected mode.
Download/Upload Procedure...........................................[Remote Setup]
In order to download or upload, the PC must be connected to the printer
using the supplied serial cable (see Section Utility Program). Also make
sure the Lexmark printer has been set into remote setup mode by enabling
[Remote Setup] from the IOP front panel menu.This is accomplished by
pressing the [OK] buttons simultaneously.
Figure 8.
Remote Setup.
OK
Warning: The Host
session will be
terminated.
OK
Ready
Section 6: Download/Upload
Return
57
Advertisement
Table of Contents
