Table of Contents
Advertisement
Section 6: Download/Upload
Download Font
(Resident Font
Resources)
60
The program code file for the AFP IOP has the name:
K10-XXXX.BIN
The utility program will show a disk directory structure from where the
desired mainfile can be selected. Note that upgrading a mainfile may in
some cases require upgrade of the fontfiles as well.
Download Font (Resident Font Resources) ......................[Remote Setup]
A fontfile can be downloaded to the interface by selecting [Download
Font] (or by selecting [Download All]). The font file is named:
F07-XXXX.BIN
This file contains both the 4028 and the 3812/16 emulated fonts. The
utility program will show a disk directory structure from where the desired
fontfile can be selected. Note that upgrading a fontfile may in some cases
require upgrade of the mainfile as well.
In the Lexmark AFP IOP front panel menu [TEST OPTIONS] is a
menupoint called [FIRMWARE INFORMATION]. Selection of this
feature will show a list of active firmware revisions (fig. 10). This feature
corresponds to the menupoint [Upload Versions] under [Upload] in the
utility program, though the versions are displayed on the PC screen
instead.
Figure 11.
Note that the "fonts" indicated are specific for the emulation currently
active. In the example (fig. 11) the font F05-3351 is shown. This is a 4028
font set. The corresponding 3812/16 fontset is called F03-XXXX. The
file F07-XXXX indicates the combined file containing both fontfiles.
Version Information.
Overall : 1.00-4281
IPDS
: 1.1-50
Fonts
: F05-3351
Ready
Return
AXIS AFP IOP User's Manual
Advertisement
Table of Contents
