Axis 14363 User Manual page 87

Note
AXIS AFP IOP User's Manual
Altering the country code under Twinax options will change the C04
country code option in Coax as well.
12.Twinax:
Press [MORE] and select [Device Address]. Set this address to a device
address given by the AS/400 system administrator.
Do NOT connect the printer to the system until this address has been
determined.
13.Twinax:
Press <READY>, power the printer OFF and mount the Twinax T-
cable to the 9 pole connector on the back of the printer.
Coax:
Press <READY>, power the printer OFF and mount the Coax cable to
the 9 pole connector on the back of the printer.
14.Connect the printer to the host system and power the printer ON.
When the printer displays [READY] and the AFP IOP gives a beep sig-
nal indicating that the communication processor is ready, the printer is
now ready for host data.
Appendix E: Installation
83