Front Panel Operation; Afp Iop Menus - Axis 14363 User Manual

Section 2

Front Panel Operation

Note:
Note:

AFP IOP menus

AXIS AFP IOP User's Manual
The AFP IOP adds a complete set of interface menus to the existing
Lexmark front panel menu structure, thus allowing all interface settings to
be altered by an easy self explanatory user interface. Menu settings relating
to Coax and Twinax change according to the cable connected to the AFP
IOP.
Changed settings will only have effect at the next Power on.
The Optra front panel will not indicate the presence of the AFP IOP
when it is Online (Ready). When printing from the AFP IOP the
frontpanel will display "AXIS AFP"(Only on Optra and 4039 Plus
printers) and "NET" as the source, instead of parallel or serial.
When the AFP IOP becomes ready after power on a "beep" is made from
the interface. This indicates that the communication processor is ready,
which is the last check in the power on sequence.
The AFP IOP menus are entered by the following keystrokes when
entering [MENUS]:
Optra and 4039 Plus Enter [MORE] until [Network Menux] is displayed. Enter this menu
series: by pressing the button next to this menu item.
4039 series: Enter the submenu [SETUP] and press [MORE] until the submenu
[Network Setup] is displayed. Enter this menu by pressing the but-
ton next to this menu item.
Section 2: Front Panel Operation
11