Ipds Exception Reporting Control; Ipds Stacked Page Counter - Axis 14363 User Manual

IPDS Exception
Reporting Control
IPDS Stacked Page
Counter
Note:
Note:
AXIS AFP IOP User's Manual
IPDS Exception Reporting Control ..........................[Exception Control]
It is often practical to suppress exception reporting on undefined
characters and position errors (printing outside valid printable area).
This option overrides the EHC control in the IPDS data stream.
• 0 [No Exceptions]
1 [Outside VPA]
2 [Undef Char]
3 [UVPA & UDEFC]
IPDS Parser syntax (with default setting):
EXCEPTION_OVERRIDE = 0;
IPDS Stacked Page Counter..................................[Page Counter update]
If the interface updates the page counter after the page has been processed,
the printer could in some cases lose pages if it is turned off while printing.
However, the printer recovers correctly from jam and cover open errors.
If Coax option C17 Intervention Required is enabled, reporting of
Stacked Page Counter after pages have been printed will be forced
regardless of the setting of this option.
• 0 [Processing] Report stacked counter after pages have been processed.
1 [Printing] Report stacked counter after pages have been printed (see Note
below!).
2 [Transfer] Report stacked counter after pages have been transferred from the
AFP IOP to the Lexmark printer.
The value "1=Printing" only works on Optra and 4039 Plus series printers.
A value of 1 on printers other than the 4039 Plus series will result in
operation as described under value "2=Transfer".
IPDS Parser syntax (with default setting):
INCREMENT_PAGE_COUNTER = 0;
Section 5: Configuration Parameters
No suppression of exceptions.
Exception reporting for position errors (Outside VPA) is sup-
pressed.
Exception reporting, when an undefined character is found, is
suppressed.
Both position errors and undefined character exceptions are
suppressed.
53