The Front Panel Menus - Axis HP MIO User Manual

System language
Section 3: Configuration
Page lenght
Emulation

The Front Panel Menus

The remainder of this section describes how to change the AXIS HP
MIO configuration parameters using the HP LaserJet 4+ front panel.
The procedure for other HP printers is similar, but the menus are
differently organized, and you may need to use different keys to
navigate. However, guided by the printed Self Test page and the
printer manual, you shouldn't have any difficulties finding the menu
entries.
The AXIS HP MIO configuration parameters are found under the
MIO MENU. To get there, first set the printer off-line, then press the
Menu key repeatedly until the MIO MENU appears.
Next, press the Item key to get into the menu. The first entry that
appears is the System Language. An asterisk is displayed in the right-
most position when the currently active value is shown.
Change the value as desired by pressing the '+' or '-' keys. Press Enter
to save the new value, and the asterisk will be displayed.
Press Item again to scroll through the parameters.
When done, press the On-Line key, and the configuration is
completed and saved.
18 AXIS HP MIO User's Manual